#Pool plaster repair austin how to#
#Pool plaster repair austin Patch#
#Pool plaster repair austin full#
#Pool plaster repair austin pro#

If they dry out, the plaster will likely shrink and leave you with more problems. Remember when I said you’re going to be on the clock after you mix? That’s because you’re going to need to keep everything damp while you’re filling in your cracks. Keep everything slightly damp and make sure you squeeze out any air bubbles from the holes. A putty knife or trowel is going to be your best friend here. Step 5: Fill itĭampen your surface area you’re working on, and then go ahead and start spreading it into the cracks and holes. It shouldn’t flow but it should still be easily spreadable. When mixing, the goal is a thick paste consistency. You’re going to be fighting with the clock if you have to stop halfway through to mix more materials. You’re going to want to do this all in one go. Make sure you mix enough to fill all of the cracks and divots you have.

#Pool plaster repair austin Patch#

Step 4: Mix it upĮvery patch and plaster will have slightly different directions, so it’s always best to follow the instructions that each manufacturer provides. If you have an air compressor you can also go around and give them a quick blow out to really remove all of the dust. The more foreign material in the cracks, the less effective the patch will be. Once dried, you can use a dry paintbrush to get the last bits of dust out. Rinse out the areas you’ve just chiseled and cut, and let them dry.

#Pool plaster repair austin full#

Now that your pool is full of holes and divots, it’s time to clean them out and prep them for filling. If you have to do this, you can cut into the plaster at an angle to create a clean spot to patch. If your plaster looks a little worse for wear, you may have to cut out the deteriorating parts. You’re going to have to knock and chisel these areas as well. That’s an indication that there are some air bubbles where the plaster has failed and become disconnected. If you hear a different hollow sound, then chances are you’re going to have to dig out the plaster there too. Step 2: Cut out the broken bitsĪfter you get the obvious spots, take a piece of wood or the wooden handle of your hammer and tap around the area of the obviously-damaged plaster.

We’re going to be replacing it, so we want to make sure we get all the loose stuff that’s no longer working out of there. You can use a chisel and hammer or some rougher tools knock out the old plaster.

Always wear eye protection, ear protection (whether they be plugs or muffs), and it’s a good idea to have a full face shield too. Speaking of protection, whenever you’re flexing your DIY skills, you want to protect numero uno first: that’s you.

This means not using your empty pool as a skate park or half pipe. The pool is meant to be full of water and anytime it’s not, you’ll need to be careful to protect your pool. However, without the water, there are more opportunities to damage the rest of the plaster. With a drained pool, you can easily get in there and take care of the damage.

#Pool plaster repair austin how to#

How to Repair Plaster When Your Pool is Empty You’re about to earn your merit badge in pool plaster repair. Okay, you have all of your equipment and now you’re ready to get started. However, if you’re a DIY master and home repairs are old hat for you, read on!

#Pool plaster repair austin pro#

Hey You! Just a quick note: if any of this sounds intimidating or you don’t feel comfortable working with these materials, it might be a smart idea to call a pro on this one.

The proper attire (long pants, long-sleeved shirt, acid-resistant boots).

A safety mask (so you’re not breathing fumes or plaster dust).

A garden hose (that’s long enough to reach around your pool).

A submersible pump and drainage hose (to drain your pool).

If you don’t have some of these items, make sure to grab them before you start the project. Let’s start by gathering all the materials and equipment you’ll need to get the job done. If you’ve ever spackled some holes in the drywall before moving out of an apartment (to try to save your deposit, right?) you already have the skills necessary to repair the plaster in your pool.īut even if you’ve never had to patch drywall holes, you’ve come to the right place.

Actually Replacing Plaster In Your Pool.

How to Repair Plaster When Your Pool is Full.

How to Repair Plaster When Your Pool is Empty.